Fountains and birdbaths are examples of some of the aesthetic additions that can make a difference on your abodes visual appeal. Concrete birdbaths and fountains are often overlooked when it comes to waterproofing protection. You will certainly want to protect your investment by using a concrete sealer to seal your birdbath and fountain.
Birdbaths and fountains are frequently constructed out of concrete and should be treated with a concrete sealer in order to presevere their life, prevent cracking, water penetration and organic growth such as mold and mildew. Since concrete birdbaths and fountains are submerged in water, a concrete sealer or concrete coating will help to reduce the porosity while preventing leakage.
All standing and flowing water must be drained from the birdbath and fountain prior to sealing.
Concrete must be clean and free of previous sealers and paints.
The birdbath and fountain must be completely dry before sealing.
Fill in any cracks with a concrete crack filler where water may be leaking through.
Use a penetrating concrete sealer or durable concrete coating to seal the birdbath and fountain.
If you are not looking to change the look or appearance of the birdbath or fountain, a penetrating concrete sealer is going to be an excellent choice. The Siloxa-Tek 8510 is the deepest penetrating, highest performing and longest lasting penetrating concrete sealer. Comprised of almost 100% actives, it is able to reduce moisture seepage and prevent mold and mildew growth. This proprietary {silane/siloxane} concrete sealer dries completely clear and three or four wet-on-wet coats are required for optimal protection. Let the Siloxa-Tek 8510 fully cure for at least 24 hours before refilling the birdbath or fountain with water. Once cured the sealer is safe and non-toxic for wildlife and birds.
Apply the Siloxa-Tek 8510 wet-on-wet. What does wet-on-wet mean? Apply the second coat immediately after the first coat while the first coat is still wet. This can range anywhere from 1 to 10 minutes depending on temperature and humidity.
If you are looking to aesthetically enhance the birdbath or fountain with a decorative sheen, or if you are looking to change the color of the birdbath or fountain completely, the Wear-Tek 4400 is the product to use. The Wear-Tek 4400 is a durable coating that will not delaminate, peel or yellow since it is extremely UV resistant. It will also make organic growth easy to clean and will keep water from seeping through the concrete itself. Once cured the coating is safe and non-toxic for wildlife and birds.
The Wear-Tek 4400 is available in a wide variety of standard solid colors and can be perfectly colored matched to a color of your choosing.
If you are not looking to change the look or appearance of the birdbath or fountain, a penetrating concrete sealer is going to be an excellent choice. The Siloxa-Tek 8510 is the deepest penetrating, highest performing and longest lasting penetrating concrete sealer.
We applaud your interest in repairing your birdbath rather than simply throwing it away and buying a new one. We've had success sealing cracks in birdbaths with clear waterproof silicone glue. It comes in a tube and is available at most hardware or home improvement stores. It's safe for home use.
Usually you will need to apply the sealer with a foam paintbrush. Allow the sealer to dry for five to 10 minutes, then wipe off the excess with a paper towel. Allow it to dry for two hours, then apply another coat of sealer. Leave the outside unpainted or apply an outdoor acrylic paint.
Distilled Vinegar: Mix nine parts water with one part vinegar. Fill the bird bath with the mixture and use a scrub brush to get rid of debris inside and outside the basin.
MS polymers and polyurethanes are the two best silicone sealant alternatives. They are very similar to silicone and in most cases, they have higher performance than silicone sealants.
Tempered glass is recommended for durability and safety. These bird baths are easy to clean and maintain, but they can be fragile and may not withstand harsh weather or accidental impacts. Glass birdbaths are best suited for sheltered areas where they are less exposed to the elements.
Putting Flex Seal on any of your plumbing system's supply pipes could expose both you and anyone else in your household to harmful contaminants. Licensed plumbers know the dangers of using products that leach toxic chemicals into residential water supplies.
Using a hose with a high-pressure nozzle, spray off any built up algae or dirt. Add water to the birdbath until it's almost full. Then add 1 to 1 1/2 cups of bleach. Cover the entire bath with a black trash bag to prevent any birds from getting to the bleach water.
Running a small recirculating pump into the birdbath also works well. My favorite water-mover, however, is the mister. Misters release a fine spray of water into the air. They seem to work best in spots where the mist bathes nearby foliage.
Arrange stones (or branches) in the water so birds can stand on them to drink without getting wet (this is particularly important during freezing weather). The water should be no deeper than 1 inch (2.5 cm) at the edges, sloping to a maximum of 2 inches (5 cm) deep in the middle of the bath.
Spar polyurethane is going to be your best waterproof finish for wood. In checking a woodworking connected site they say the key to being food safe is proper curing, which is described as 30 days at room temperature.
Address: Suite 751 871 Lissette Throughway, West Kittie, NH 41603
Phone: +2366831109631
Job: Sales Producer
Hobby: Creative writing, Motor sports, Do it yourself, Skateboarding, Coffee roasting, Calligraphy, Stand-up comedy
Introduction: My name is Laurine Ryan, I am a adorable, fair, graceful, spotless, gorgeous, homely, cooperative person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
