Kitchen Wall Cabinets | CabinetSelect.com (2024)

FAQs

Are wall cabinets cheaper than base cabinets? ›

Base cabinets are significantly more expensive than wall cabinets due to the extra size and extra costs for drawer boxes and hardware. Replacing the doors and drawer fronts save money, and labor for removal and installation. Also, new base cabinets may not have the same dimensions as the old ones.

Wall cabinets are also called upper cabinets or “uppers.” These cabinets have the most design flexibility: varying three different heights, multiple widths, custom depth options and glass door options.

Building your cabinets is very cost-effective since you get to choose the kinds of materials you want firsthand and you won't have to pay for artistry. If you're not up for a full-blown construction or starting from scratch, you can buy low-priced pre-made cabinets and modify them to suit your style.

Standard kitchen base cabinet widths are 12, 18, 24, 30, 33, 36, and 48 inches. Standard kitchen wall cabinet widths are 12 to 36 inches and standard heights are 30, 36, and 42 inches.

Stock cabinets

IKEA keeps its costs low because they are sending your order to you in pieces and because the materials they use are very inexpensive.

Stock cabinets are considered to be cheap kitchen cabinets, although not in quality. Semi-custom cabinets: Next up in price, semi-custom cabinetry is also factory-made in standard sizes, but you'll find more woods, finishes, and decorative features to fit your kitchen design. Widths range up to 60 inches.

3 Types of Kitchen Cabinets

There are three types of cabinets: partial overlay, full overlay, and inset. Each term is used to describe how the cabinet door or drawer sits on or in the cabinet frame. The three types of cabinets also represent different budgets and styles.

The Shaker-style cabinet door is the most common door style in kitchens today. This five-piece flat-panel style has a frame made from four pieces and a single flat center panel for the fifth piece. Shaker gets its name from the distinctive Shaker furniture style, which uses simple, clean lines and emphasizes utility.

IKEA cabinet boxes are made of fiberboard and melamine foil. Cabinet doors and drawer fronts are made of fiberboard. They are covered in melamine foil, paint, wood, or glass.

What is the most expensive part of a kitchen remodel? ›

Believe it or not, the most expensive part of a kitchen remodel are the cabinets and by a large margin. Depending on the project, cabinets take up as much as 29% of the overall project cost. Labor, appliances and countertops are the second, third and fourth most expensive parts of a remodel, respectively.

Use Stock or Semi-Custom Cabinets

If you're happy with stock sizes and styles, you can save money by purchasing them over semi-custom or custom cabinets. Semi-custom cabinets are a lower-cost alternative to custom cabinets. Semi-custom cabinets are much like stock cabinets: standard sizes, styles, and finishes.

Wall Cupboards are usually fitted 500mm above a 900mm worktop, if your worktop is thicker than 30mm then this dimension will be diminished. 500mm is a comfortable dimension and if you have any Tall Cupboards in your kitchen the cupboard tops will line through.

The typical measurement for the spacing between cabinets and countertops is 18 inches. It's generally advisable to maintain a minimum clearance of 15 inches and a maximum of 20 inches.

Standard depths are 12, 15, 18, 24 inches, but 12 inches is the most common depth for regular wall cabinets used to store food and dishes. This depth allows sufficient space beneath the cabinets to make countertops ranging in depth from 24 to 26 inches usable.

Base Cabinet

A cabinet that sits on the floor. These cabinets usually support the countertops. They differ from wall cabinets which hang on the wall. Base cabinets are typically 24″ deep, and vary by width.

Custom cabinets are the most expensive and the price varies according to the style and design you choose.

Frameless cabinets are usually more costly than framed because of specialized equipment required for construction. Frameless is not an option if you're looking for traditional styling.