The Ultimate Buying Guide to Crushed Stone and Gravel (2024)

Now that we have looked at some of the basics, let's move on to discovering some of the most common types of gravel you could use for your flower beds, driveways, or construction project.

We will start with several types of crushed stone and then move on to different types of gravel.

Types Of Crushed Stone

There are many different types of crushed stone, and we understand how tough it can be to keep them all straight! Since many are just associated with a number, the names aren't much help.

Here are the most common types of crushed stone that you will encounter and their typical uses:

Incredibly versatile, crushed stone #57 is the most commonly used type of crushed stone. It is also cheap and easily accessible.

#57 works well for driveways, as a base for building or drainage projects, or as an aggregate in concrete.

#57 crushed stone can be made of different rock types (granite, limestone, basalt, etc.), with limestone being the commonest. It has relatively coarse particles with diameters of ¾” to 1.” The name 57 refers to the size of the screen used to sift the stone.

  • Crushed stone #411

#411 is a mixture of larger, fine, and dust particles. It combines #57 stone and #10 screenings and dust.

The small particles and dust help to solidify the material into a good, hard base. This makes it an ideal stone for a base for paver patios, stone walks, retaining walls, artificial turf, driveways, etc. Any application that calls for a good solid base will benefit from the use of #411 stone.

  • Crushed stone #3

As the name suggests, #3 is one of the larger sizes of crushed stone. It is a popular type, usually made up of stones ½ - 2 inches in diameter.

Most gravel driveways comprise at least three different layers of stone, and #3 is a popular choice for a solid, 4-inch-thick base layer. This gives the whole driveway a strong foundation and ensures proper drainage.

#3 is also popular for railroad construction and any project that requires good drainage.

At Zimmerman Mulch, we have a line of #3 limestone that is a bit larger - approximately three inches in diameter. Check it out here.

We also have a four-inch stone that works perfectly for drainage or base layers. If you want to know more, take a look here!

  • Item #4

Similar to crushed stone #411, Item #4 is a mixture. It is made by mixing golf ball-sized chunks of stone with sand and dirt. The sand and dirt help to compact the whole substance together. Like #411, Item #4 is a perfect base material for driveways, sidewalks, or patios.

You can get variations of Item #4, such as:

  • Recycled Item #4 - Made from recycled blacktop, brick, or other stones.
  • Quarry Item #4 - Made from crushed limestone.
  • Gray or Blue Item #4 - Gray or blue

All types of Item #4 make solid base layers for many different projects!

  • Stone dust

Stone dust comprises fine stone particles and dust, making it almost like coarse sand.

Because it is so fine, stone dust is not an excellent choice for areas with vehicles, but it is ideal for walking paths, as protection for underground utility lines, or to level areas to create a smooth base layer.

To know more, check out our stone dust and other limestone products at Zimmerman Mulch!

  • Quarry process

Quarry process stone is also similar to #411 and Item #4. It’s a mix of smaller crushed stone and fine stone dust.

This type of stone mix is highly compactable and can be used for a base layer, landscaping, filling in low areas, or even sometimes for the top layer of a driveway. When used for driveway purposes, the quarry process compacts into a hard, semi-solid layer that can take large vehicle traffic.

The quarry process is also called:

  • Crusher Run
  • Dense-Grade Aggregate (DGA)
  • Dirty stone
  • Shoulder stone
  • ¾ Blended Stone

Now that we have looked at several of the most common types of crushed stone let’s look at some common types of gravel.

Types Of Gravel

Gravel is often used for aesthetic purposes, while crushed stone finds its place more often as a construction material.

Why is this?

First, due to natural water erosion, gravel has smooth, rounded edges, making it a more comfortable surface to walk on.

And secondly, due to both those soft edges as well as its beautiful natural colors, gravel is usually more aesthetically pleasing than crushed stone.

Let’s look at a few common types of gravel.

  • Pea gravel

Pea gravel consists of small, rounded stones roughly the size of, you guessed it, a pea. The stones come in various natural colors, such as brown, white, rust, gray, and even slightly translucent.

Pea gravel is attractive and easy on both feet and tires. It is, therefore, a popular choice for the top layer of a walk or driveway.

However, there is one drawback:

Since the stones are smooth and round, they don’t lock together like the jagged edges of crushed stones tend to do. They tend to get pushed around by vehicles, migrate off the driveway, or walk. They need edging to keep them in place.

  • River rock

River rock is a gravel that has been smoothed and rounded by water. It is harvested from creeks and rivers, also known as creek stone. It is larger than pea gravel but comes in the same natural browns, tans, and grays. River rock can come in a range of sizes.

Like pea gravel, river rock tends to shift and move under the weight of vehicles due to its smooth, rounded edges. So while it makes an attractive choice for the top layer of a driveway, it may require some edging to keep it in place.

Smooth, colorful river rocks are an excellent choice for landscaping as they are pretty beautiful.

At Zimmerman Mulch, we carry several different types of river stones. Look through our selection and pick the one that gives you the desired look!

  • Lava rock

Lava rock forms when hot lava cools while gases bubble through it. When this happens, a light, porous type of stone forms.

Lava rocks come in red, black, or gray and are suitable for landscaping. They can be used for weed control, aesthetic purposes, or even mulch.

Why do these rocks make good mulch?

The porous material helps hold and conserve water, maintain soil temperature, and prevent erosion. They also make a great, low-maintenance weed suppressant.

Lava rock is not a good construction, walkway, or driveway material.

  • Marble chips

Want stunning aesthetic appeal?

Try marble chips for your walk or driveway!

Marble chips are exactly what their name implies - chipped marble. White and gray and shimmering in the sunlight create a gorgeous look!

Maybe you are wondering if marble chips are sharp, as their name seems to suggest. But don’t worry! Marble chips are not sharp and are perfectly safe to walk on.

The only downside to marble chips is what you might expect would accompany a marble driveway - a hefty price tag!

Marble chips are a good choice for topping off a walkway or driveway, but, like pea gravel and river rock, they are smooth and tend to slip around. They will need edging to keep them in place. You don’t want all that expensive stone to disappear!

  • Jersey shore gravel

Characterized by its golden color, Jersey Shore Gravel is small, smooth gravel similar to pea gravel. It comes in shades of tan, white, brown, and gold and looks like sand on a beach.

Jersey Shore Gravel is commonly used in the New England and Mid-Atlantic States as a top layer for driveways and walks. It will also need edging, as it is smooth gravel.

If you like the golden look, check out our gorgeous pearl pebbles! These decorative stones will spruce up any property.

The Ultimate Buying Guide to Crushed Stone and Gravel (2024)

FAQs

How do I figure out how much crushed stone I need? ›

Formula for Crushed Stone for a Project

In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.

How to figure 57 stones? ›

The density of #57 stone or granite gravel is 2,410 pounds per cubic yard. For a project that is 10 feet wide, 40 feet long and 2 inches deep, for example, the volume will be 2.5 cubic yards. The estimated amount of material needed is 2.98 tons.

What is the difference between crushed stone and crushed gravel? ›

Gravel is a material of naturally occurring loose stone chunks with rounded edges. You can find it occurring naturally, perhaps in a gravel pit or river. Crushed stone, on the other hand, is manufactured. Large rocks (often limestone) are processed in a stone crusher to make smaller pieces.

Which is better crusher fines or road base? ›

Road base is ideal for supporting heavier surfaces and main roads, whereas crusher dust is a more affordable alternative suitable for smaller roads, slabs, and pads. It's essential to choose the right material based on the specific requirements of your project.

How much will 1 ton of crushed stone cover? ›

As a general guide, one ton of gravel typically covers approximately: 100 square feet at a 2-inch depth. 80 square feet at a 3-inch depth. 60 square feet at a 4-inch depth.

How much does a yard of gravel cover at 2 inches? ›

1 cubic yard of pea gravel will cover 18 square yards 2 inches thick.

How to calculate gravel? ›

To measure the driveway in cubic feet, multiply the length by width by depth. For cubic yards, divide the total cubic feet by 27. Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons.

How much will 1 ton of 57 stone cover? ›

Generally speaking, a ton of #57 stone can cover 150 square feet at a depth of two inches.

How many inches is 57 stone? ›

#57 Stone - smaller particles, typically between ⅜ and 1-inch in diameter. #57 stone is the most widely used aggregate in SWM construction, and is typically found in stone reservoirs, around underdrains, under permeable paving systems, and as a filter media over dry basin drawdown devices.

What are the disadvantages of crushed stones? ›

Con: Messiness

One of the biggest cons of a crushed stone driveway is the mess caused by wayward stones, which are strewn about every time someone walks or drives over them. If the driveway is surrounded by grass, the stones will likely end up there and cause problems for your lawn mower and other maintenance tools.

How thick should crushed stone be? ›

Factor in the depth of stone your project needs

For the depth, be aware that crushed stone projects need a minimum depth of 2 to 4 inches. Many projects require more than that. For example, using the stone for the base of a driveway would require a depth of 4 to 6 inches.

What is the best crushed stone for compaction? ›

Screenings, otherwise known as FA5 or limestone screenings, are a great choice for backfill because it compacts well. Because of this, screenings are most often used for pipe and sewer backfill, or as a base for brick pavers.

Will weeds grow through crush and run? ›

Using crush and run gravel to outline the edges creates a clean separation between your lawn and garden areas. The contrasting textures of the gravel and plants provide a visually appealing contrast. Additionally, the stone acts as a barrier to deter weed growth, helping you maintain a low-maintenance garden.

What is the cheapest road surface? ›

Roads need strength and durability and asphalt is the most economical option for road surfacing. It is generally cheaper than concrete and more popular with road users due to its smoother ride and lower noise levels.

What is cracker dust? ›

Cracker dust, also known as crusher dust or blue metal dust, is produced from the crushing of blue metal aggregate during the quarrying process. It is commonly used as a base for artificial lawns. When compacted it creates a secure base whilst still allowing for good drainage.

How do you calculate the volume of stone required? ›

This is done by multiplying the area you want to cover (in square meters) by the depth of stone you want to lay (in meters). This gives you the volume in cubic meters. For example, if you want to cover an area of 10 square meters to a depth of 0.5 meters, the volume of stone required would be 10 * 0.5 = 5 cubic meters.

How many yards is 1 ton of crushed stone? ›

The density of crushed stone is around 1,600kg per cubic metre. A British ton is very close to 1,000kg so the volume of a ton is approximately 0.625 cubic metres so if we multiply by 1.331 that is about 0.832 cubic yards.

References

Top Articles
Latest Posts
Article information

Author: Cheryll Lueilwitz

Last Updated:

Views: 5925

Rating: 4.3 / 5 (54 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Cheryll Lueilwitz

Birthday: 1997-12-23

Address: 4653 O'Kon Hill, Lake Juanstad, AR 65469

Phone: +494124489301

Job: Marketing Representative

Hobby: Reading, Ice skating, Foraging, BASE jumping, Hiking, Skateboarding, Kayaking

Introduction: My name is Cheryll Lueilwitz, I am a sparkling, clean, super, lucky, joyous, outstanding, lucky person who loves writing and wants to share my knowledge and understanding with you.