If you’ve ever laid mulch or gravel you know easily it can get misplaced. Especially if you have little ones running around. When we installed pavers in our back yard I wasn’t thinking ahead and after filling the joints with loose gravel, we quickly realized we needed a solution. Enter, Mulch Glue!
WHAT IS MULCH GLUE?
Mulch glue is a landscape adhesive that can be used to hold mulch, wood chips, gravel, pebbles and other small landscaping material in place. It dries fast and is permeable so you don’t have to worry about water pooling up on top. It’s kid and pet friendly, non-toxic and made in the USA.
It’s great for the border of pathways where rocks and mulch get easily kicked away and out of place and walkways where there’s a lot of foot traffic. It sounded like the perfect solution for us so we decided to give it a try!
HOW TO USE MULCH GLUE
Step 1: Mix together your solution
Mix together one part mulch glue to two parts water. Combine in a garden sprayer for application and stir until blended well.
Step 2: Apply the mixture directly to your surface
Apply the mixture with your garden sprayer. A garden sprayer makes it really easy to control where you want the glue to go, which makes application a breeze. Two coats are recommended and I waited an hour before applying the second one.
You can see that it leaves a little bit of a residue when you first apply it, but as it dries it turns clear. If you look really close you can see a very subtle sheen on the gravel but it’s hardly noticeable.
If you notice that your material still seems to be moving around a bit, you can apply another coat.
Step 3: Enjoy your new landscaping!
That’s it! 2 easy steps to using mulch glue to secure your loose gravel or mulch. The mulch glue was a game changer for us and made it SO much easier to leaf blow too! We get a lot of debris in our backyard from all the trees in the nearby woods and leaf blowing would always knock the gravel around. Not anymore!
These pavers were the perfect addition to our back deck makeover and I’m glad that we found a solution to keep them looking beautiful.
You can watch the mulch glue process in action in this Instagram reel!
Prep Time5 minutes
Active Time20 minutes
Total Time25 minutes
Instructions
- Mix Together Your Solution - Mix together one part mulch glue to two parts water and stir to combine.
- Apply the mixture directly to your mulch or gravel - Using your garden sprayer, spray one coat of the mulch glue solution so it completely covers the area you want to keep in place. After an hour, apply another coat.
- Enjoy your beautiful new landscaping that won't get kicked around!
Notes
If you notice your gravel or mulch is still a little loose, you can apply an additional coat of mulch glue.
Related
FAQs
Absolutely! Don't let the name deceive you. Mulch & Rock Bond is a very versatile product and can be used on sand, gravel, leaves, and other porous ground cover.
Can you use mulch glue on gravel? ›
Absolutely! Don't let the name deceive you. Mulch & Rock Bond is a very versatile product and can be used on sand, gravel, leaves, and other porous ground cover.
What glue keeps pebbles in place? ›
And since it's called mulch glue, I'd have to imagine that it works even better on actual mulch! The bottle says it works well on wood chips, sand, small pebbles, hay straw, and more. So, it's worth a shot in your own yard if things are looking messy! I'll keep you posted on how this lasts over time.
How long does mulch glue last on rocks? ›
Mulch Anchor - Mulch Glue and Pea Gravel Stabilizer, Ready to Use, Lasts Up to 2-Years, Fast-Dry, Non-Toxic (1 Gal.) I'm happy that it worked as expected. Worked as advertised, kept pea gravel in place during heavy rain.
What can I spray on gravel to keep it in place? ›
it's called mulch glue. you mix up one part glue to 2 parts water. before I applied it, I made sure the gravel was looking perfect. I put the mixture in a garden sprayer, which was actually really easy to use.
How do you secure loose gravel? ›
Mix Together Your Solution - Mix together one part mulch glue to two parts water and stir to combine. Apply the mixture directly to your mulch or gravel - Using your garden sprayer, spray one coat of the mulch glue solution so it completely covers the area you want to keep in place. After an hour, apply another coat.
How do you lock down gravel? ›
The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you're stabilizing pea gravel with cement, it will hold for a while until it's eventually damaged by traffic and water exposure.
What is the best way to stabilize gravel? ›
The most effective, durable, and low-maintenance way to stop gravel from spreading is by using plastic permeable pavers from TRUEGRID. Much like borders, they lock the gravel into place.
How to stop gravel from moving off a driveway? ›
The secret to preventing gravel migration on a driveway, path or patio, is to install a gravel retention system. These systems are designed to hold gravel in place and prevent its migration to other areas, as well as preventing ruts and bare patches.
Is mulch glue worth it? ›
This is a good product but the price is crazy for how small the bottle is and how much you have to dilute it. One bottle = 1 coat and they suggest doing 2 - 3 coats which is $150 at that point just to make the mulch not move. I was spraying on a small area of medium bark. First coat sunk in like I didn't even spray it.
Does Mulch & Rock Bond still allow water drainage? Yes, Mulch & Rock Bond is applied to the surface of mulched areas and reaches down a few layers depending on how thick it is applied. Water is still able to permeate the voids in the mulch as usual.
How to apply gravel glue? ›
Shake well and combine with water in a one to one ratio. Stir really well, close it up tight, and now it's time to glue. Pump up your garden sprayer until you feel pressure. while you're pumping, then simply spray all your gravel slow and steady.
How much area does Mulch glue cover? ›
Coverage depends on how thickly you apply the product, the weight of the material to bond, and the desired hold. One gallon of Mulch & Rock Bond will cover up to 1,500 sq. ft. with light coverage and up to 750 sq.
What can I use instead of Mulch glue? ›
The formula for making mulch glue at home is most often identified as one-part ordinary white glue (the kid-friendly, non-toxic kind) and two-parts hot water.
What can I use to bind gravel? ›
GravelHold is a versatile product but has two popular uses. One of the uses is creating a strong and compact gravel path or walkways. Apply GravelHold to gravel paths with stones which are 1mm-10mm in size to create a solid surface ideal for supporting pedestrian traffic.
Does water drain through mulch glue? ›
Does Mulch & Rock Bond still allow water drainage? Yes, Mulch & Rock Bond is applied to the surface of mulched areas and reaches down a few layers depending on how thick it is applied. Water is still able to permeate the voids in the mulch as usual.
What can I use to stabilize pea gravel? ›
Thankfully, there are a number of options for how to keep pea gravel from washing away. The two most effective methods for stabilizing pea gravel are cement and permeable pavers.
What is the best glue for rocks? ›
Loctite PL 500 Landscape Block Adhesive
You really can't go wrong with this reliable adhesive, which dries in less than 20 minutes even on cold winter days, but it will take a few days to fully cure. This Loctite adhesive comes in an off-white color that can be painted over.
